Full Inverter GRE HPGIC45 Heat Pump

The heat pump is a highly efficient and economical heating system designed to heat the pool water.

This device uses outdoor air as a power source, transforming it into heat through a thermodynamic cycle.

The heat pump works through a thermodynamic cycle that involves heat transfer from an outside source (in this case, ambient air) to the pool water.

The process takes place in several steps:

1. Evaporation: The heat pump contains a coolant that, at low pressure, absorbs the heat from the outside air. This coolant, in a liquid state, evaporates by absorbing heat, becoming steam.

2. Compression: The coolant steam is sucked by a compressor, where it is compressed. This increased pressure raises the temperature of the steam, transforming it into a hot gas at high pressure.

3. Condensation: The hot gas is directed to a heat exchanger, where it transfers its heat to the pool water. By losing heat, the coolant is condensed again, returning to its liquid state.

4. Expansion: The liquid coolant passes through an expansion valve, where its pressure is reduced. This process causes the coolant to cool down and re-enter the evaporator, restarting the cycle.

Through this continuous cycle, the heat pump can extract heat from the outside air, even in cold conditions, and transfer it to the pool water, providing an efficient and sustainable solution for its heating.

In order to optimize its performance, it is essential that it be connected to a by-pass kit, which allows the circulation of the water in derivation to the pump.

Like other heating systems, heat pumps are installed after the filtration system, ensuring a proper flow of water.

The GRE HPGIC heat pump series consists of four models, each equipped with a winter protection case, ensuring their integrity during inactivity seasons.

TECHNOLOGY FULL INVERTER

• Very economical solution thanks to Full Inverter technology, which allows to optimize the energy consumption of the heat pump.
• Offers three modes of operation: Boost mode for a rapid increase in temperance, Smart mode to increase power automatically and finally Ecosilence with reduced power to save more energy and emit a lower noise level

INTEGRATED CONECTIVITY

• Thanks to the Fluidra Pool® application and its intuitive interface, the functions of the heat pump can be adjusted and consulted remotely from anywhere at any time with a smartphone.

EXTENSION OF THE TEMPORATE

• Allows to use the pool for longer thanks to the use of an outdoor ambient temperature of up to -7 °C