Tobogan Pranaslide 1.50m Astralpool

The Astralpool Pranaslide slide, due to its dimensions and measurements and its bearable weight, is an exceptional slide for moments of relaxation and recreation for your whole family and more specifically for the little ones in the house (not recommended for adults).

Characteristic

• Made of fiberglass reinforced polyester.
• Designed in a nice light blue color.
• Includes 2 handrails made of white painted aluminium.
• It incorporates a hydraulic installation to facilitate movement along its entire surface.
• Includes anchors.
• The Astralpool Pranaslide slide supports an approximate weight of up to 80kg.

Mounting

Following the following steps you will not have any problem when assembling your Slide.

1. Choose the appropriate site considering:

• The measures of the slide. Figure 1.
• The minimum safety heights recommended in figures 2 and 3.
• That the water that will flow along the track, falls into the interior of the pool.

2. There must be a water intake at the foot of the stairs, for the connection with the discharge nozzle, which will feed the track with water, with a valve under a hatch that can only be opened with the help of a tool.

3. For a correct and solid fixing to the ground, a concreted area must be provided as a foundation, of 1m x 0.5m and 0.3m, both at the foot of the ladder and at the front supports of the slide.

4. Once the concrete has cured, place the slide in its location and mark the fixing points to the ground.

5. Remove the slide and drill the previously marked points on the cement with a 10 mm vidia drill bit.

6. Firmly fix the slide to the ground with the supplied screws, plugs and washers. Figure 4.

7. Connect the track nozzle to the water intake with the transparent tube supplied with the set.

Maintenance.

To carry out proper maintenance, you should regularly check:

1. The good condition of the slide nozzle, so that it does not have any type of breakdown or is obstructed so that the water can flow correctly. Thus avoiding overheating of the slide, due to the action of the sun and thus favoring the movement of users along the slide ramp.

2. The transparent tube that leads the water to the nozzle of the track is in conduction.

3. A correct fixing between the track, stairs, supports and railings.

4. The good condition of the anti-slip treads on the steps and replacing them immediately when they show signs of wear.

5. The state of the black outline of the edges. If it is peeling off, you should glue it down with a clanocrylate adhesive. If it is in poor condition, it should be replaced as it would be a protection to avoid damage to users.

6. That the polyester surface does not have cracks or bumps that could cause cuts or scratches to the users, clean the slide with a detergent that contains disinfectant and limescale remover, thus ensuring that it does not drip into the pool.

Security warning

• Do not delay the repair or replacement of any damaged part of the slide, which may cause an accident.
• Respect the existing regulations in each country in relation to the location and safety levels for the installation of the slide and the recommendations in this manual.

Tips to avoid accidents

• Lower the ramp of the slide, adapting a suitable position.
• Users must get off one at a time and not crowd under the ramp.
• Keep the security area clear.
• This slide is not designed to support the weight of adults.