pH-plus is 1.5 kg. Bayrol

Baryrol pH-Plus 1.5 Kg. is a sodium carbonate based product for raising the pH level of water below 7.0.

Its high chemical purity ensures that it is a fast acting and effective product. In pre-filled bags of 500 g. they make it extremely easy to use.

It is a fully compatible product with the most common chemical treatments for swimming pools such as chlorine, bromine, activated oxygen, etc. It is also compatible with all filtration systems (sand, glass, cartridge, diatomaceous, etc.)

It does not alter the different coatings of the pool, being able to be used in pools with liner, gressite, marmolin, polyester, etc.

DOSAGE:

Add 1 bag per 10 m3 of water to increase the pH by 0,1 units.

METHOD OF USE:

• It is advisable to check the pH value at least twice a week and every time you refill the pool.
• The pH should be between 7.0 and 7.4 if the water is treated with chlorine. If treated with bromine it should be between 7.4 and 7.6.
• Dosage the required amount directly into the pool water at various points on its surface and preferably in front of the push nozzles, with the pump running.
• It is not recommended to add the product directly to the skimmer.
• Keep the filtration system running for 2 to 3 hours, after which time determine the pH and readjust if necessary.

It is possible in certain cases that the pH value does not rise even after adding the increment. If this occurs it may be due to a mismatch in the alkalinity of the water, if applicable determine the alkalinity value and correct with specific products such as Bayrol's Alca-Plus.

Do not forget that the filtration/purification system of the pool must operate at least 8 hours every day.

For further information on the product, please refer to the documents in the 'ADDITIONS' tab.