Tiper 2 125 1.25 CV - 230V single-phase pump from Espa

The Tiper 2 125 1.25 CV - 230 V single-phase pump is a single-cell pump designed for the recirculation of water in hydromassage and spa systems.

The Tiper 2 125 1.25 CV - 230 V single-phase pump designed with a compact and robust design.

It has a special device for total emptying, thus avoiding the retention of residual liquid in each cycle, this device is called total drainage.

The Tiper Pump incorporates a thermal protector and total insulation greater than 3750 V.

Characteristic

The Espa Tiper Pump is made with the following materials:

• The suction and discharge body, open impeller and motor-pump support are made of technopolymer.
• The motor shaft is made of 100% AISI 420 stainless steel.
• The motor housing is made of aluminum.
• The mechanical seal of the Tiper 1 pump is made of graphite and soapstone.
• The tiper 2 pump mechanical seal is made of graphite and aluminum oxide.
  
  

The motor of the Espa Tiper Pump is made with the following materials:

• It has an IP 55 protection and external ventilation.
• 1 x 230V single-phase motor incorporates thermoamperometric protector and its corresponding capacitor.
• Electrophoresis painting thus ensuring the engine great resistance to corrosion.
  
  

The Espa Tiper Pump has one type of connection:

• With suction and discharge fittings.
• 50 mm internal suction fitting for gluing.
• Outside 58 mm for tube with clamps.
• Discharge fitting.
• Tiper 2: 2 internal 40 mm sockets for gluing and 48 mm external sockets for tubes with clamps.
  
  

Technical characteristics

Dimensions

Performance curve at 2900 rpm