NOPHOS phosphate remover, 1 L. Bayrol

NOPHOS phosphate remover is a highly concentrated product to remove the presence of phosphates from your pool water. Its main component, lanthanum, causes an agglomeration of these phosphates so that they can be retained by the filtration system and subsequently discharged into the drain by washing the filter.

By removing phosphates from the water, it prevents the growth of algae, since they feed directly on them.

Nophos can be used as a preventive or curative treatment depending on the levels of phosphates in the water, which should not exceed 0.1 mg/l.

The product is compatible with any filtration and disinfection system that is installed in the pool.

DOSAGE AND USE:

Curative treatment:

In case of recurring algae problems or presence of phosphates in the water above 0.1 mg./l.

• Pour 50 ml of Nophos directly into the skimmer for every 10m³ of water. If the pool is equipped with a cartridge or diatomaceous earth filter, pour the product directly into the water spread over different parts of the pool. Filtration in operation.

• After treatment, if the phosphate concentration is still high, we can repeat the dose without any problem.

Weekly preventive treatment:

To prevent high concentrations of phosphates in the water.

• Pour at night, after bathing, 20 ml. of Nophos for every 10 m³ of water. The discharge must be done in front of the impulsion nozzles while we keep the filtration system working

It is important to periodically measure phosphate levels with a suitable device.

Always keep levels below 0.1 mg/l.

You can consult all the product documentation in the "ATTACHMENTS" tab.