Jolly Gel water clarifier

The Jolly Gel clarifying gel for pools removes phosphates and smallest dirt particles from the pool water, achieving extreme water clarity in just a few hours.

The product can be used in sand, glass and zeolite filters. It should not be used in cartridge filters or filtering cotton balls.

It is presented in a box with four gel blocks that must be placed in the cesto of the prefilter of the circulating pump, these cubes will dissolve slowly as the water passes over them, creating a transparent glutinose membrane on the surface of the filtering medium, penetrating into the bed to a depth of approximately 15 cm. This glutinose structure will collect the finest dust particles along with the algae spores.

Then you will only have to do a counter-current washing of the filter when it is necessary to remove the residues by the filter dewater.

DOSIFICATION AND USE:

Use a pool gel block between 20 and 60 m3. Do not place chlorine pills near the gel.

The first time you use Jolly Gel you must check the water pH and adjust it between 7.2 and 7.6. It is very important for the user to control the filter's working pressure for the first six hours after the application, as the product will retain a lot of dirt that will raise that pressure, once the product has worked it must wash the filter and continue with its usual treatment. However the product may continue to work for up to 3 weeks.