A carregar...
Recém-chegado
AstralPool 2" threaded hydromassage jet
AstralPool | SKU:
33586
34,82 €
Preço unitário
/
Indisponível
Imposto incluído. Envio e descontos calculados na finalização da compra.
AstralPool 's 2" threaded hydromassage jet is an accessory that can be installed on water + air jets in hydromassage spas. It has a water inlet diameter of 50 mm and an air inlet diameter of 32 mm.
AstralPool 2" threaded hydromassage jet está esgotado e será enviado assim que estiver de novo em estoque.
Tempo de trânsito 1 - 3 dias
Descrição
Descrição
AstralPool 's 2" threaded hydromassage jet is an accessory that can be installed on water + air jets in hydromassage spas. It has a water inlet diameter of 50 mm and an air inlet diameter of 32 mm.
The combination of pressurized water jets with air bubbles creating intense and relaxing hydromassage effects.
It has a flow rate of 4 m³/h and a pressure of 0.8 bar.
Facility
To carry out a correct and simple installation of the AstralPool 2" threaded hydromassage jet, we must follow the following simple and quick steps.
- Mark a point approximately 200 mm below the normal water level on the Spa wall (#1).
- Once the point in the center has been made, we previously drilled with a drill and then with a Ø 60-75 cup milling cutter so that it passes through the nozzle body. (No. 2).
- We glue the cap supplied to the body of the Jet (nº 3).
- If you want a greater acceleration of the water at its outlet, you can place one of the 3 bushings supplied (nº 4) inside the choke.
- Place the Jet body on the back of the Spa wall and thread the nozzle on the front by placing a flat gasket on both sides of the Spa wall. (no. 5 and 6).
